Telecom -48vdc power distribution unit

 Name:   industrial pdu socket

Model:YKDPZ-A

 Website:www.ykpowersupply.com

Regards as rack mount PDU , We can customized all kind of PDU according to your request 

1. Input 2chs -48VDC/24VDC/220VDC/110VDC or -48VAC/24VAC/220VAC/110VAC , with 10A, 16A, 32A, 63A ,100A,125A circuit breaker/air switch can be optional
2. Output 1-16chs or 1-6chs can be optional
3. with 10A, 16A, 32A, 63A,100A,125A  (optional) output current capacity
4. With alarm function or without alarm function.
5. The max output Channel we can make is 36 channels.

Main introduction of  rack mount PDU 

      YKDPZ-A is a DC power distribution system module with 19inch standard structure, small size , easy to install and use. There is A-B 2chs input, multi-channels output (max 18chs). Visual-aural alarm when there is failure. LED display running status

This equipment has excellent performance and reliable quality. It’s widely used in Telecom, BTS, Mobile, Unicom, electric power, army, public security, etc.

Specification of  rack mount PDU 

 rack mount PDU  

      This DC power distribution system module can display the running status of all the channels. When there is failure or break, Red LED ON and buzzer sounds and giving the alarming signal to third party system for alarming

If you want to stop alarm, please press “SA” button. If there are others failure right now, there will be no alarm.

When there is failure again, RED LED still ON, and it will not OFF until the failure is eliminated and switch is turn on

Installation and connection of rack mount PDU  

1. Install

Easy and simple install. Standard 3.0U structure, can install in the standard 19 inch cabinet.

2. Connection

All the connection is on the rear panel.  

Please connect with the anode, cathode and grounding as required. Please tighten the connection screw and nut. Connection must be steady and reliable to reduce the resistance.

3. Notes

Please don’t change or replace any wiring or air switch etc inside the dc power distribution system module. If you want to change or replay, please contact with manufactures.

Notes

Must be engineer or technician or electrician to install the DC power distribution system !

1. Open the package, check the DC power distribution system module appearance and accessories is damaged or not in transportation.
2. Check before electrify  check the appearance, power wiring, terminal board also the screw is loosen / damaged or not.
3. Check the INPUT DC power source is as require
4. Make sure the correct connection of anode “+” and cathod 

essential information
country：	China
company address：	ChinaGuangdong402, No.11, Kehui 1 st street, Science road, Luogang district, Guangzhou, China
website：	https://yucoo.en.alibaba.com/

contact us

• 

  KEMA-KEUR Class II Surge Protection Protective In 20kA Imax 40kA 35Din rail Modular Power Supply SPD DPS Lightning Transient Imp

  product type：Power Distribution Equipment

  Zhuhai Telehof Electrics Company Limited view details
• 

  Electric Saver ES-10 for 250A Power Factor correction Panel 250 Amp. With 3 Phase 4 Wire Power Distribution Equipment

  product type：Power Distribution Equipment

  CELEC ENTERPRISES view details
• 

  Latest Quality Unbalanced Load Electricity Saver Automatic CELEC Power Distribution Equipment From India

  product type：Power Distribution Equipment

  CELEC ENTERPRISES view details
• 

  Latest Automatic 3 Phases Power Saver Equipment Custom Industrial Power Distribution Equipment

  product type：Power Distribution Equipment

  CELEC ENTERPRISES view details