Welcome to wziep.com!
Welcome to wziep.com!
3.Technical parameters
Technical parameters |
Value |
|||
Input |
Connection |
Single phase-2-wire, 3-phase-3-wire, 3-phase-4-wire |
||
Frequency |
45-65Hz |
|||
Voltage |
Rating: single-phase :AC 100V,400V Three-phase: AC 3×57.7V/100V(100V),3×220V/380V(400V),3×380V/660V(660V)(96 size only) Note:72 profile not suitable for high voltage applications |
|||
Overload:1.2 fold rating {continuous) : 2 fold rating for 1 second |
||||
Power consumption:< 0.5VA |
||||
Current |
Rating: AC IA,5A |
|||
Overload:1.2 fold rating(continuous);10fold rating for 1 second |
||||
Power consumption:< 0.5VA |
||||
Output |
Electric energy |
Output mode:open-collector photo-coupler pulse |
||
Pulse constant: 10000imp/kWh(settable),see wiring diagram for details; |
||||
Communication |
RS485port, Modbus -RTU protocol,DLT645 protocol(versions 07 and 97), baud rate 1200 ~ 38400 |
|||
Function |
Switching input |
Dry contact input, built-in power supply; |
||
Switching output |
Output mode: Relay normally open contact output |
|||
Contact capacity: AC 250V/3A, DC 30V/3A |
||||
Analog output |
1-5V,4 - 20mA |
|||
Accuracy class |
Frequency:0.05Hz,Current,Voltage:0.2 class,Reactive power:l .0class,Reactive Electric energy:l .0class, active power:0.5class,active electric energy: 0.5class,2-31th harmonic measurement:±1% |
|||
Power supply |
AC/DC 85-265V or DC24V(±20%)or DC48V(±20%) power consumption≤10VA |
|||
Security |
Power frequency withstand voltage |
Between Power supply//Switching Output// Current Input//voltage Input and Transmitting// Communication //Pulse Output//switching input AC 2 kV 1min; Between Power supply,switching output,Current Input,voltage Input AC 2 kV 1min; Between Transmitting,Communication,Pulse Output,switching input AC 1kV 1 min; |
||
Insulation resistance |
Input,Output end to machine enclosure >100MΩ |
|||
Environment |
Temperature |
work: -25°C~+65°C storage: -40°C ~+80°C |
||
Humidity |
≤93%RH Non-condensing |
|||
Altitude |
≤2500m |