captcha

Welcome to wziep.com!

Products

  • Product
  • Supplier
  • News
  • Retail
Buyer Sign In Register Now
Categories
Event&Exhibition

SPS Plasma Sintering Power Supply Plasma DC Pulsed Power Supply supplier

category： Switching Power Supply

reference price：￥$3,450.00 - $6,987.00

Purchase quantity
- +
Send Inquiry Add Collection

Foshan Noah Electrical Co., Ltd.

Ms. Chen
Enter the store contact us
Share To
Product details Company introduction
Parameter information
Product Description
The applied time of SPS technology can be dated from 1980s. However, since there was no suitable matching power supply, the production efficiency was too low to well promote this technology. Now, Foshan Noah Electrical Co., Ltd developed the SPS Plasma Sintering Power Supply, whose pulse peak can reach 120000A. And its pulse current, duty ratio and the numbers of pulse can be adjustable and customized to meet the requirements from research to production.
Main usages
This product can be used to sinter conductive powder materials as well as electrify the non-conductive powder materials, generally to produce metal, ceramics, nano materials, amorphous materials, composite materials, functionally gradient materials and etc.
Product features
▶ Supply power for vacuum sintering process of plasma conductive materials or non-conductive materials, improve sintering efficiency and quality;
▶ The output DC pulse voltage, current and frequency can be customized;
▶ Strong power-off protection function. SPS plasma sintering equipment will automatically start the protection device when unconditional short circuit occurs;
▶ The power supply is modular.The maintenance and replacement of power supply devices are convenient. This product is designed by us independently with regular devices. If there is a small fault in the work, it can be solved according to the maintenance manual or the technician's remote guidance;
▶ Good safety performance. All wiring harnesses are in the cabinet to ensure that the operator can touch the equipment at will. The front and back doors of the cabinet should be unlocked with a key to ensure the safety of using the equipment;
▶ The product is designed in accordance with the national standard. Protections for overcurrent, overvoltage, undervoltage, overtemperature, phase loss, leakage and water flow are stable and sound. After the power is turned off, the shunt resistor in parallel on the bus support capacitor of this product will automatically discharge the residual voltage on the capacitor until the residual voltage is zero.
Technical parameter
AC input
3-5 three phase AC380V±38V; frequency 50Hz±2Hz
Output DC pulse voltage
6V≤U0≤16V; (can be customized)
Output DC pulse current
can reach 120000A
Output DC pulse frequency
90kHz≤f0≤120kHz
Production scene
production line
product testing
Production site
Product warehouse
Company Profile
Foshan Noah Electrical Co., Ltd is an enterprise of manufacturing, researching and sales, established in 2007 and located in Fenjiangbei Road No.91, Chancheng, Foshan, Guangdong, China. Our main products are: 1. 110kV and below power transformers (including oil-immersed transformer, dry-type transformer, rectifier transformer, furnace transformer, amorphous transformer, excitation transformer, isolation transformer, etc.); 2. Complete equipments: high and low voltage whole set switchgear; Box-type substation(including Compact Substation, Pad-mounted transformer, Wind power box transformer, PV box transformer, etc.); 3. Electronic transformers(including high-frequency transformer, mid-frequency transformer, high-frequency inductor, etc.); 4. Power quality products(including APF, SVG and SPC); 5. Special power supply (including for vacuum coating: magnetron sputtering DC power supply, magnetron sputtering intermediate frequency power supply, magnetron sputtering bias power supply; high-power bidirectional controllable DC power supply; high-power programmable DC power supply, high voltage DC power supply, special non-standard DC power supply; SPS plasma sintering power supply; plasma nitriding surface treatment power supply; high-power electroplating power supply; high-power oxidation power, high-power electrolytic power, etc.) Our R & D department has more than 40 doctors, masters, and bachelor degree or above technical members. And our Export Department consists of six professional sales with rich experience in foreign trade. Driven to provide clients with good-quality products and technical support, thoughtful and rapid pre - and post-sale one-stop service. we offer thoughtful and rapid pre-sales and after-sales one-package services.
Certifications