Categories

Suntree 30 Ampere normal open 12v dc contactor

category: Contactors

reference price:¥$5.00 - $25.00

Purchase quantity
- +

Wenzhou Xinchi International Trade Co., Ltd.

Ms. Tan
Product details Company introduction
Parameter information

JSR series inflatable high power DC contactor is suitable for DC high voltage, high current change applications.  

In recent years, photovoltaic, energy storage, wind energy and electric vehicles have been used to vacuum the product or to fill the product with nitrogen and inert gas for arc extinguishing. In the vacuum, because the pressure is low, the gas molecules are less, the breakdown voltage between the contact gaps is increased, and the possibility of arc formation is reduced to achieve the purpose of arc extinguishing.

Inflatable inert gas decomposes and ionizes at high temperatures and is very different from air. At the same time, inert gas molecules and their decomposition at high temperatures have the property of adsorbing free electrons and forming negative ions, which makes them burn in inertia. The arc has a lower arc voltage, a smaller arc diameter, and a smaller thermal inertia of the arc column. The above two methods have high requirements on the processability, and the airtightness of the product during the entire life process cannot be destroyed, otherwise the product life will be greatly shortened.

Product number
 JSR30A—1G—X—SH 
JSR50A—1G—X—SH
Contact form
SH
SH
Contact material
Cu alloy
Cu alloy
Contact resistance
≤1.9mΩ(12VDC/10A)
≤1.9mΩ(12VDC/10A)
Maximum switching voltage
1200VDC
1200VDC
Maximum switching current
250A/320V
250A/320V
Overload cut
250A at 320VDC, 1 time
250A at 320VDC, 1 time
Mechanical life
2x105time
2x105time
Electrical life
 1×104time(400V,30A)
 1×104time(400V,50A)
Standard Voltage
12VDC 
24 VDC 
48 VDC 
Operating Voltage
9.6~13.2VDC
19.2~26.9 VDC 
38.4~52.8 VDC 
Maximum voltage
15VDC
30 VDC 
60 VDC 
Maximum pull-in voltage
9.6 VDC
19.2 VDC 
38.4 VDC 
Performance parameter
Insulation resistance
≥100MΩ/500VDC 
Dielectric withstand voltage
2500VAC/min 
Action time
≤20ms
Release time
≤12ms 
Shock
11ms, 1/2 sine wave, peak, 196 m/s2
vibration
Sine wave, 10~2000Hz, peak, 196 m/s2
Ambient temperature
-40~85℃ 
Use ambient humidity
5%~85%RH 
Terminal form
Threaded type
Package form
Inflatable seal
weight
About 12


The charging capacity is above 30A, and the current of 250A can be cut off at 320VDC; the volume is small and the weight is light. The switch portion and the drive portion are inflated and sealed so that they can cut off high capacity loads. Fully sealed construction for high safety; for use in explosive or hazardous environments, the coils and contacts are not oxidized, even if they are not working for long periods of time. Built-in energy-saving coil, low holding power, the back electromotive force is close to 0V.