Welcome to wziep.com!
Welcome to wziep.com!
category: Energy Meters
Technical parameters | AMC16Z-FAK24 | AMC16Z-FAK48 | |||
Measurement parameters | Voltage, current, frequency, active power, reactive power, power factor, active power, reactive power, switching state | ||||
2-31 times harmonics | |||||
Bus voltage | Rated | 220VAC | |||
Measurement range | ±20% | ||||
Overload | Instantaneous voltage 2 times/second | ||||
Current outgoing line loop | Rated | 50mA | |||
Range | 0.125~60mA | ||||
Overload | Duration 1.2 times, instantaneous 10 times/second | ||||
Input frequency | 45~60Hz | ||||
Measurement accuracy | Outgoing line | Voltage/current/active power/active energy level 0.5, reactive power/reactive energy level 1 | |||
Auxiliary power supply | Power supply by AMC16Z-ZA | ||||
Environment | Temperature | Working:-15℃~55℃ Storage:-25℃~70℃ | |||
Humidity | Relative humidity | ||||
Altitude | ≤2500m | ||||
Communication | RS485/Modbus-RTU | ||||
Installation method | DIN35mm Guide rail or bottom plate mounting | ||||
IP grade | IP20 | ||||
Class of pollution | 2 | ||||
Safety | Insulation | All terminals and the insulation resistance between the conductive pieces not below 100 m Ω | |||
Withstand voltage | A-channel voltage and current signal // B-channel voltage and current signal // other ports meet AC2kV 1min between pairs, leakage current should be less than 2mA, no breakdown or flashover phenomenon. | ||||
Electromagnetic compatibility | Anti static interference | Level 4 | |||
Resistance to radiation of radiofrequency electromagnetic field | Level 3 |