• [SCREW TERMINAL BLADE FUSE BLOCK] – 6 circuits with negative bus and cover. Easy to open insulating cover that provides access to fuses and satisfies ABYC/ USCG requirements
• [LED WARNING INDICATOR] – Red LED warning light will light up immediately when the corresponding fuse is blown. It is both safe and easy for you to check and replace the blown fuse
• [SAFE MATERIAL] – Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon
• [APPLIANCE NAME LABELS] – Bonus electric device name Labels are provided. You can quickly identify which appliance is going wrong
• [FREE BLADE FUSES] – 6-Way Package includes: 20A Fuse*4, 15A Fuse*4, 10A Fuse*2, 5A Fuse*2, Labels*2, Screws*4

• Product description

  Size:6 way

  This fuse box is suitable for all kinds of automotive and marine applications, including 6v, 12v & 24v systems (maximum voltage 32v)
  Specifications
  Accepting fuse:Standard blade fuse (ATO / ATC)
  Quantity of circuits / fuse slots:6
  Positive connection:M5 stud (5mm bolt)
  Output connections:Standard 6.3mm spade terminals
  Current rating per circuit / fuse:30 amp (Max.)
  Current rating per box:100 amp (Max.)
  Volt rating:32V DC (Max.)
  Dimension:approx. 3.34*2.48*1.39in
  Package size:3.35 * 3.85 * 1.55in
  Package weight:3.45oz
  What is in the Box
  1 * Fuse Box Holder

About this item

6 Way Fuse Box with Thumbscrew and LED Indicator-12 Circuit with Negative Bus Fuse Block

• Don’t you just hate it when there’s something wrong with your car but you don’t exactly know what?
• Have you tried to find a simple way to better fix the problem instead of wasting lots of time to figure out the error?
• This update 12-way fuse box is everything you’ve been looking for and more

• Specifications

   

  • Net / Gross Weight: 176 / 187g
  • Product Dimensions: 87.7*88*36.5mm
  • Input Voltage: 12V-24V DC
  • Input / Output Current: 100A / 30A max. per circuit
  • Material: PBT base + PC waterproof and dustproof cover + Nickel plated copper connection terminal

   

  • Simply Quick Setup: DC 32V voltage, max. 30A output per circuit, 100A max. input.
  • Each fuse holder is numbered to make fuse installation and identification as easy as possible.
  • Special LED safety light:If a fuse blows the red LED next to the problem fuse, illuminates allowing for fast and hassle free identification of a fault.
  • Transparent plastic cover with push latch system, splash and dust-proof design. Adds extra protection to your fuse box and fuses.
  • High quality and durable. This fuse panel has a #10-32 stud for power feed, .250” male quick disconnect terminals, and can take an input voltage of 10 – 32 V DC.

• LED Indicator for Blown Fuse With red led warning indicator, you can quickly identify & replace blown fuses immediately

  Thumbscrew Design Thumbscrew design, thumbscrew is affixed to the cover to prevent being misplaced, and it will be super easy to open the cover

  Make Wiring Clean Compact size allows it to be installed in tight spaces close to the loads they protect. Can be widely used in autos, modified cars, buses, trucks, RVs, motor cycles, ships, boats etc.v

  SPECIFICATIONS

• Input Voltage	12V-24V DC
  Maximum Voltage	32V
  Maximum Amperage	100A per block/ 30A per circuit
  Quantity of Fuse Slots	12
  Fuse Type	ATC or ATO
  Product Dimensions	150*85*50mm
  G.W./N.W.	324g/322g

  LED Indicator Light	Red
  Main Line Terminal	M5 threaded stud
  Main Wire	#4-6
  Single Wire Terminal	M4 threaded stud
  Single Wire	#12-16
  Type	Fuse Blocks

  Item Weight	3.26 pounds
  Material	ABS
  Mounting Type	Panel Mount
  Operating Voltage	12.0 volts