Categories

dust removal equipment industrial dust collector 1A 60kV high frequency switching power supply

category: Switching Power Supply

reference price:¥$3,685.00 - $6,250.00

Purchase quantity
- +

Foshan Noah Electrical Co., Ltd.

Ms. Chen
Product details Company introduction
Parameter information
High Frequency High Voltage Pulse Power Supply for Electrostatic Precipitator
Water-cooled Controller + High voltage generator
Working Principles
NY710144 series High Frequency High Voltage Pulse Power Supply for Electrostatic Precipitator consists of two parts: control cabinet and high voltage generator.
Circuit principle: 50Hz 3 phase 380VAC input, full bridge controllable rectifier, IGBT inverter to generate high frequency power supply, then through the high frequency transformer to step up the voltage, and finally rectified into high frequency high voltage DC pulse power output.
Application
High Frequency High Voltage Pulse Power Supply for Electrostatic Precipitator is an important part of the electrostatic precipitator system equipment. According to the different requirements of working conditions, it can be widely used in industrial sectors of dust removal, fog removal, desulfurization, dehydration, impurities separation and recycle of rare metals and other occasions, which is an important equipment to protect the environment, comprehensive utilization of resources. Its specific application scope is as follows:
Metallurgical industry: used for black and non-ferrous metal smelting dust removal, recycle of metal smelting raw materials and comprehensive utilization. Building materials industry: used for dust removal and raw materials recovery in cement and refractory industries. Electric power industry: used for boiler flue gas dust removal. Petroleum industry: used to separate salt, water or other impurities contained in crude oil. Chemical industry: used to recycle valuable components in flue gas, used in acid industry for fog removal, dust removal, etc. Light textile industry: used for alkali recycle and dust removal in papermaking and textile industry. Electronics, medicine, machinery industry: for purifying air and improving product quality.
Production Models
Product Models
Three Phase AC Input Voltage
Output Impulse Frequency
Output 
No-load Voltage
Rated Output Current
Output 
No-load Voltage
Rated Output Current
380V
>40kHz
40kV
300mA
80kV
300mA
380V
>40kHz
40kV
600mA
80kV
600mA
380V
>40kHz
40kV
1000mA
80kV
1000mA
380V
>40kHz
40kV
1500mA
80kV
1500mA
380V
>40kHz
40kV
2000mA
80kV
2000mA
380V
>40kHz
60kV
300mA
100kV
300mA
380V
>40kHz
60kV
600mA
100kV
600mA
380V
>40kHz
60kV
1000mA
100kV
1000mA
380V
>40kHz
60kV
1500mA
100kV
1500mA
380V
>40kHz
60kV
2000mA
100kV
2000mA
Technical Parameter
High Frequency High Voltage Pulse Power Supply For Electrostatic Precipitator 
Technical Parameter 
Item
Item Description
Power supply 
input parameter
Input voltage
Three phase 380VAC±10%/50Hz (Sine)
Input current
0~ -100A








Power supply
output parameter
Output voltage 
0~100kV 
Output DC pulse frequency
>40kHz
Output DC pulse current
0~2A; (Module combined power) 
Output DC duty ratio
0~90%;(0~25us)
Output constant mode
Constant current
Output DC voltage standard
40kV, 60kV, 80kV, 100kV(Can be customized)
Output standard current value
300mA, 600mA, 1000mA, 1500mA, 2000mA (Can be customized)
Output ripple
<1%
Output impulse peak current
>1000A
Output pulse number
1~40000 pulse/second repetitive
Output short circuit protection
Cooling method: forced air cooling or forced water cooling







Working condition
Protection class
IP45
Working temperature 
0℃~50℃
Relative air humidity in 25°C
20~85%
The air shall not contain corrosive steam, particles, conductive particles and particles that will become conductive after absorbing moisture
Air cooling, natural air

Water cooling
Cooling water: inlet water temperature ≤30°C, water pressure 1.5–4.0Kg/mm2. Shall adopt the water pipe which can match with a water pipe joint in the size of 8mm (inner diameter) ×12mm (outer diameter). Do not reduce the inner diameter of the cooling water
pipe at will.
Safety Protection
The equipment has the function of heavy and light load protection. When the equipment is under heavy or light load, the secondary current and secondary voltage of the equipment shall be limited below the rated value; Self - check and self - recovery function; One time over current protection function; Short circuit protection function; IGBT(IPM)fault protection function; Open circuit protection function; Impact resistance function; Transformer oil temperature over limit protection function; IGBT(IPM)over temperature protection function.
Functional Performance
Stability Reliability Safety Environmental adaption Testability Maintainability
Product Test:
Real shoots of on-site product:
Production scene
Production workshop
production line
product testing
Production site
Product warehouse
Company Profile
Foshan Noah Electrical Co., Ltd is an enterprise of manufacturing, researching and sales, established in 2007 and located in Fenjiangbei Road No.91, Chancheng, Foshan, Guangdong, China. Our main products are: 1. 110kV and below power transformers (including oil-immersed transformer, dry-type transformer, rectifier transformer, furnace transformer, amorphous transformer, excitation transformer, isolation transformer, etc.); 2. Complete equipments: high and low voltage whole set switchgear; Box-type substation(including Compact Substation, Pad-mounted transformer, Wind power box transformer, PV box transformer, etc.); 3. Electronic transformers(including high-frequency transformer, mid-frequency transformer, high-frequency inductor, etc.); 4. Power quality products(including APF, SVG and SPC); 5. Special power supply (including for vacuum coating: magnetron sputtering DC power supply, magnetron sputtering intermediate frequency power supply, magnetron sputtering bias power supply; high-power bidirectional controllable DC power supply; high-power programmable DC power supply, high voltage DC power supply, special non-standard DC power supply; SPS plasma sintering power supply; plasma nitriding surface treatment power supply; high-power electroplating power supply; high-power oxidation power, high-power electrolytic power, etc.) Our R & D department has more than 40 doctors, masters, and bachelor degree or above technical members. And our Export Department consists of six professional sales with rich experience in foreign trade. Driven to provide clients with good-quality products and technical support, thoughtful and rapid pre - and post-sale one-stop service. we offer thoughtful and rapid pre-sales and after-sales one-package services.