The CO detector has been designed and built according to the European legislation to verify versatile, the presence of toxic gas. Carbon monoxide. To make a complete system of control, with high flexibility, we have relied on a microprocessor that makes the detector suitable for home use. This equipment is considered to protect individuals from the effects of exposure to monoxide carbon. This equipment will not fully protect individuals with specific medical conditions. If you have any doubts, consult a practicing doctor. PE - DEGAPE028 - 05/17 /
The electronic CO device detects Carbon Monoxide gas, both when the maximum CO concentration is exceeded admissible, set at 300ppm, both when, for long periods, low CO concentrations persist in the environment, but for the principle of accumulation can equally damage the human organism. It can operate, through the built-in relay, solenoid valves, sirens and any other signaling or resolving device alarm. A series of technical features makes this detector extremely versatile, reliable, precise and safe. The relay, free from voltage, then allows you to no longer have detectors on a single valve or aspirator, guaranteeing control over several environments at risk. The technical panel of the detector is completed by the special control circuit of the level of efficiency of the sensor with signaling of any failure, and the external container with IP42 protection degree