Categories

single phase Din Rail CT connection energy meter LEM011CT 1.5(6)A

category: Energy Meters

reference price:¥$7.30 - $14.00

Purchase quantity
- +

Yueqing Logos Electrical Co., Ltd.

Ms. Chen
Product details Company introduction
Parameter information
Detailed Images
Products Description
Model
Accuracy
Reference
Voltage(V)
Current
specifications(A)
Starting
current(A)
Insulation performance
LEM011CT
Class 1
127 or 230
1.5(6)
0.01
AC voltage 4kv for 1 minute, 1.2/50us waveform impulse voltage 6kv.

Specifications

1.Available as 35mm DIN standard rail mounted, conforming to Standards DIN EN 50022, as well as front PANEL mounted (the center distance between two mounting holes is 63mm or 67mm). Two mounted methods above are optional for user.
2.6 pole width (modulus 12.5mm), complying with Standards JB/T7121-1993.
3.Can select the step motor impulse register of 5+1 digits (99999.1kWh) or 6+1 digits (999999.1kWh) LCD display.
4.Can select two LCD displays with 6 digits, to show total power (5+1 digits display), and real-time power (4+2 digits display) which can be cleared by the red button on the nameplate. This red button can be protected by the seal and this model meter suits for the renting house.
5.Can select the inside load switch for the remote control credit.
6.Can select the inside far infrared data communication port and RS485 data communication port, the communication protocol complies with Standards DL/T645-1997, can also select the other communication protocol.
7.Equipped with a polarity passive energy impulse output terminal, conforming to Standards IEC 62053-31 and DIN 43864.
8.Two LEDs to indicate separately the power state (green) and the energy impulse signal (red).
9.Measure the active energy consumption in one direction on single phase two wire, which is not related with the load current flow direction at all, complying with Standards IEC 62053-21.
10.Direct connection for use. Two connections: type S and type T for option.
11.The short terminal cover is made with the transparent PC, to reduce the installation space and is convenient for centralized installation.

single phase Din Rail CT connection energy meter LEM011CT 1.5(6)A
Other Products
Our Company
Yueqing Logos Electrical Co., Ltd. is an all-round manufacturer dedicated to research, development, manufacture and sales of top-quality energy meters. Logos furnishes itself with a strongly practical and fully experienced R&D team which is capable of keeping up with the changes of meter industry. Furthermore, Logos has established a whole industrial chain management and an innovation system of integrated organization by combining cooperation of developing the strong cooperative partnerships with the main Electric Power Research Institutes, National Institute of Metrology as well as the world-renowned electrical enterprises both at home and abroad.
Work Shop

Compression Molding

Welding Circuit Board

Testing&Calibration Product

Contact Us

Ed Cai

Call (Whatsapp/Wechat): 0086-13989776916
QQ: 2881556607
Website: http://www.logosmeter.com
Address: Xia'an Village, Beibaixiang Town, Yueqing, Wenzhou, Zhejiang, China (Mainland)
FAQ
Q1. Are you factory?
A: Yes ,our factory is located in Wenzhou,two hours to Ningbo,four hours to Shanghai and two hours to Yiwu by train.Only 40 minutes to Wenzhou international Airport by car.

Q2. Do you offer OEM service?
A: Yes,we have been providing OEM/ODM service to global manufacturers and suppliers for many years.

Q3. What′s your warranty?
A: We offer 2 years warranty.

Q4. Are samples available before order?And do you charge samples?
A: Yes ,samples are normally available in 7-10 days after the receipt of sample payment.But the sample payment will be retuened to you once place an order.

Q5. What′ s material of your product?
A: We ues fire-proof plastic for the frame,red copper and silver for inside compoents.