Welcome to wziep.com!
Welcome to wziep.com!
category: Energy Meters
reference price:¥$6.87 - $7.23
Single Phase energy meter Digital display Din Rail Kwh Meter with XTM75SA
SPECIFICATIONS:
Meter type | XTM75SA (LCD DISPLAY) |
Digit length | 6+1 |
Nominal voltage(Un) | 120V 230V |
Operational voltage | 161 - 300V AC |
Insulation capabilities: | |
AC voltage withstand Impulse voltage withstand | 2KV for 1 minute 6KV – 1.2µS waveform |
Starting current (Ist) | 0.04A |
Minimum current (Imin) | 0.5A |
Transitional current (Itr) | 1A |
Refrence current (Iref) | 10A |
Maximum current (Imax) | 50A |
Operational current range | 0.5A-50A |
Over current withstand | 1500A for 0.01s |
Internal power consumption | ≤2W /10 VA |
Test output flash rate ( PULSE LED) | 1600 imp |
Pulse output rate (pin 3 & 4 ) | 1600 imp |
Power supply indicator (POWER LED) | Meter is connected and working OK |
Consumption indicator (PULSE LED) | Flashing at load running |
Date store | The date can be stored more than 20 years when power cut |
Product Informations:
Model XTM 75SA single phase DIN rail active energy meter is a kind of new style single phase two wire active energy meter, it adopt microelectronic technique
and imports large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements
of class 1 single phase active energy meter stipulated in international standard IEC 62053-21.
It can directly measure accurate 50Hz or 60Hz active energy consumption from single phase AC electric net. This meter has seven digits LCD displays shows the active energy consumption.
It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
This meter has already got the patent certificate form China State Intellectual Property Office at present. Patent certificate No.201230520871.8 and other country patent certificate are in assessing
Function and features
1.35mm standard DIN rail installation, comply with DIN EN 50022.Or front boards setting (mounting holes center distance 63mm).Either is ok.
2.Pole 6 width (modulus 12.5mm) comply with standard JB/T7121-1993
3.LCD display 6+1 digits (999999.1kwh)
4.Standard configuration: impulse output passive (polarity).May select distant impulse output passive (no polarity). Contact with all kind of AMR system conveniently comply with standard IEC 6205-31 and DIN 43864
5.Two LED instructions: power supply state (green) and signal of energy impulse (red)
6.Standard configurations don’t detect the direction of load current. May select automatic detection the direction of load current and instructions by individual LED
7.Measuring single phase two wires active energy consumption in single direction is nothing with the direction of load current. Comply with standard IEC 625053-21.
8.Standard configuration: type S wiring (inlet from bottom, outlet from top) direct connect operation.
9.Standard configuration short terminals cover, select extension terminal cover in need of electricity safe.