Categories

Single Phase Digital Kwh Electric Energy Meter with Install Din Rail ( ENERGY METER EXPERT )

category: Power Meters

reference price:¥$7.20 - $8.36

Purchase quantity
- +

Xintuo New Energy Co., Ltd.

Mr. Lin
Product details Company introduction
Parameter information

Single Phase Digital Kwh Electric Energy Meter with Install Din Rail

 
 

 Product Brief

 Model XTM 18SA single phase electronic DIN rail activate energy meter is a kind of new type of new style single phase

 two wire activate energy meter, it adopt microelectronic technique ,and imported large scale independent

circuit, use advanced technique of digital and SMT techniques, etc. It has its completely intellectual property rights

 and minimum size. It has already passed the test of the international authority KEMA.The meter completely accord with 

relevant technique requirements of class 1 single phase active energy meter stipulated in international standard 

IEC 6205321. It can directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net

 accurately.This meter has white backlight source eight digits LCD displays shows the active energy consumption.

 It has flowing features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.

This meter has already got the patent certificate form China State Intellectual Property Office at present. Patent

 certificate NO.201230473770.X and other country patent certificate are in assessing.

 

Function and Features

 

 1.35mm standard DIN rail installation, comply with standard DIN EN 50022

 2.Single pole width (modulus 17.5mm) comply with standard DIN 43880

 3.Standard configuration: 7+1 digits display (9999999.1kwh) by white black source LCD.May select 7+1 digits 

display (999999.1kwh) without backlight source general LCD (product configuration code is SE)

4.Standard configuration: pulse output passive (polarity). The pulse output passive can be no polarity.  Contact 

with all kinds of AMR system convenient; comply with standard IEC 62053-31 and DIN 43864.

5.Bicolor LED instructions power supply state is green and signal of energy impulse red.

6.Automatic detect the direction of the flow of load current. . When the instructions on LED display HELP 1, it means 

the direction of the flow of load current reverses.

7.Measuring single phase two wire active energy consumption in single direction,  it is nothing with the direction of the

 current load, comply with the standard IEC 62053-1,

8.Directly connect operation. Standard configuration type S.

9.Extension terminals cover, for electrical safety.

 

Technical parameter

 

Meter type 

XTM18SA (LCD display)

Digit length

7+1

Nominal voltage(Un)    

120V

230V

Operational voltage  

161 - 300V AC

Insulation capabilities: 

AC voltage withstand

 Impulse voltage withstand

2KV for 1 minute

6KV – 1.2µS waveform

Rated current (Ib)

5A

Maximum rated current (Imax) 

20A/25A/30A/32A

Operational current range

0.4% Ib- Imax

Over current withstand

30Imax for 0.01s

Operational frequency range

50Hz ±10%

Internal power consumption

≤2W / 10VA 

Test output flash rate (RED LED)

2000imp/kWh

Pulse output rate (pins 20 & 21

2000imp/kWh

Power supply indicator (Green LED)

Meter is connected and working OK

Consumption indicator (RED LED)

Flashing at load running

Data store

The data can be stored for more than 20years without power

 

 Dimension and wiring