Categories

Outdoor Microwave Perimeter Barrier for Perimeter Alarm System

category: Alarm

reference price:¥$70.00 - $80.00

Purchase quantity
- +

Shenzhen Meian Technology Co., Ltd.

Ms. Ye
Product details Company introduction
Parameter information
Product Description

 

 

MCB-150  Wired Infrared Microwave Perimeter Barrier Guard Alarm Outdoor

 

The MCB-200 is a bistation microwave detector for outdoor applications, it comprise a transmitter (T) and receiver (R). when mouted facing each other, create a protected area with length up to 200m. width of the protected area vary. according to the distance between the two units and the selected system sensitivity.

 

The MCB-200 is designed to protect large part of protected perimeter and can easily be installed on any type of fence or pole in order to provide a solid barrier protection and block all perimeter activities. this barrier rejects alarms from birds and small animals due to its original method of false alarm elimination.

 

Several MCB-200 systems can be combined in order to provide a complete perimeter protection with unlimited space or shape. which is designed for continuous round the clock operation

  • Detection Range: 200m
  • Operation Temperature: -40 °C -65 °C
  • Power input: 10.2-30V DC
  • High RFI/EMI immunity
  • Protection force: direct sunlight, wind up to 30m/sec, snow and rain precipitation ( up to 30mm/h), small animals, ground swing, snow and glas up to 0.3m.
  • Making alarm when human intruders walking, running or crawliling with speed from 0.2 till 10m/s, applying 5-30 Volts from control unit to the terminal marked.

 

 

 

Cross Installation

 

In order to avoid dead zones under aerials, and to increase the protected area. it is possible to install multiple MCB-200 systems connected together with overlapping. overlap configurations are performed with the units located at the angles of protected area. the minimum overlap for sufficient coverage must be at least 1.5-2M. the optional way is to install transmitters (T) only or receivers ( R) at the point of overlap.

 

 

 

 

SPECIFICATIONS

 

microwave frequency10.525GHz
modulation frequency1.0KHz
maximum transmitting power35mW(continues) 50mW(peak)
scope(length of protection zone)Max.200m
lobe widthapprox.5m
lobe heightapprox.2.5m
rated power supply voltage12-24V
range of power supply voltage10.2-24V
current consumption70mA at 24V DC
relay contacts valuesNC 2V DC, maximum current 0.1A
alarm period3 sec ( max.)
tamper switchNC 28 V DC maximum current 0.1A open when cover is removed
detection speed(target velocity)0.2-10m/sec
remote testingbuilt in self test generator simulates acutal intrusion signals
flatness of groundapprox.0.3m
maximum height of grass on the ground0.3m
maximum height of snow on the ground0.5m
alarm output-switching over of relay contacts for the timeminimum 3 sec
dimension of unit(trans./rec.)w/o bracket158*113*46mm
weight(T,R and accessoires)1.1kg
operating temperature range

-40C-65C

ralative humidityup to 98%
weatherproofingall openings with gasket and sealed conformal coated circuit board aganist snow and rain up to 30mm/hour.