Categories

Wireless Alarm Door Contact Sensor for Smart Home Security System

category: Smart Control System

reference price:¥$5.40 - $16.00

Purchase quantity
- +

Ningbo Sentek Electronics Co., Ltd.

Ms. Liu
Product details Company introduction
Parameter information
Advantages

Wireless Alarm Door Contact Sensor for Smart Home Security System

Product Description

Specification: 

WC10 is a surface mounted Door/Window Contact that can be installed on doors, windows, and many

other objects that open and close. The sensor transmits signals to the control panel or receiver when a magnet

mounted near the sensor is moved away from or closer to the sensor. The sensor has an external input that

accepts N/C dry contact devices. The sensor is also equipped with a cover tamper for additional security.  

Wireless Alarm Door Contact Sensor for Smart Home Security System

 

 


 Product Features: 

Wireless Signal Range

350 ft., open air, with 2GIG or Honeywell Wireless Alarm Control Panel

Code Outputs

Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery

Transmitter Frequency

345.000 MHz (crystal controlled) or other frequency

Transmitter Frequency Tolerance

± 15 kHz

Transmitter Bandwidth

24 kHz

Modulation Type

Amplitude Shift Keying—On/Off Keying (ASK-OOK)

Unique ID Codes

Over one (1) million different code combinations

Supervisory Interval

70 minutes

Peak Field Strength

Typical 16,000 uV/m at 3m

External Input Sampling Current

20 uA

External Input

Accepts N/C dry contact devices

Reed Switch Magnetic Sensitivity

10 to 15 amp turns

Reed Sensitivity

0.625 in. (1.59 cm) minimum gap, 1 in. (25 cm) typical

Magnet Type

Rare earth

Magnet Dimensions (LxWxH)

1.5 x 0.37 x 0.26 in. (3.8 x 0.94 x 0.65 cm)

Sensor Dimensions (LxWxH)

2.59 x 1.03 x 0.52 in. (6.59 x 2.63 x 1.32 cm)

Housing Material

ABS plastic

Color

White, Tan or Brown available

Operating Temperature

32° to 120°F (0° to 49°C)

Relative Humidity

5-95% Non-Condensing

Battery (included)

Two (2) CR2032, or equivalent Lithium batteries

Battery life

2 years (on normal condition)

Regulatory Listing

FCC Part 15

Warranty

Two (2) years(limited)

Included Accessories

Two (2) Phillip’s flat-head screws, one (1) two-pin connector with a 12” flying 2-wire lead, adhesive strip

Weight

1.16 oz. (33 g) (including battery & magnet)

Compatibility

Honeywell, 2GIG, GE, and DSC

Order Information:

WC10-H: compatible with Honeywell and 2GIG wireless panel (345MHz)

WC10-2: compatible with 2GIG wireless panel (345MHz)

WC10-G: compatible with GE Intelogix wireless panel (319.508MHz)

WC10-D: compatible with DSC wireless panel (433.92MHz)

Company Information