Welcome to wziep.com!
Welcome to wziep.com!
category: Frequency Meters
reference price:¥$40.00 - $60.00
1.Product introduction
This series digital display frequency meters are used to measure AC frequency in low voltage distribution system. They are equipped with analog output, digital input, relay output and communication function supporting Modbus-RTU protocol. There are different choices of outline size for this kind of meters. So they are suitable to replace analog pointer ampere meters.
This series digital display AC frequency meters have high environment adaptability because their working temperature range is -40~70℃ and EMC better than III level. They can be applied in control systems, distribution automation systems, industrial automation systems and intelligent buildings.
2.Technical Specification
Electrical feature |
|||
Accuracy |
0.2%,0.5%(defaulted) |
||
Data refresh rate |
1s |
||
Input |
Voltage |
Rated value |
AC 100V, 220V, 380V etc. |
Range |
(0.05 ~ 1.2)Un |
||
Overload |
Continuous 1.2Un,instantaneous 2Un/1min |
||
Frequency |
45~65Hz |
||
Power supply |
Working range |
AC 80~270V (50/60Hz),DC 80~270V,DC 24V |
|
Consumption |
≤5VA |
||
Relay output |
Contact capacity (resistive):AC 5A/250V,DC 5A/30V |
||
Analog output |
Current output |
DC 4~20mA, 0~20mA etc.,load ≤350Ω |
|
Voltage output |
DC 0~5V, 1~5V etc.,load≥20kΩ |
||
Communication |
RS485 interface,Modbus-RTU protocol,baud rate 2400~9600bps |
||
Environment |
|||
Protection degree |
Panel IP64,case IP20 |
||
Working temperature |
-40~70℃(LED), -25~70℃(LCD) |
||
Storage temperature |
-40~85℃ |
||
Relative humidity |
≤93%RH |
||
Insulating ability |
Between power and input or output≥AC2kV,between input and output≥AC1kV |
||
Altitude |
2500m |
3.Outline dimension
Outline code |
Pointer meter model |
Panel(mm2) |
Cut-out(mm2) |
Installation depth(mm) |
2 |
42 square type |
120×120 |
111×111 |
55.5/76 |
3 |
6 square type |
83×83 |
76×76 |
75 |
9 |
9 square type |
96×96 |
91×91 |
75/98 |
4.Similar products