Punch counter magnetic induction 5-digit electronic digital display counter ZX-5C stamping punch special counter

Punch counter magnetic induction 5-digit electronic digital display counter ZX-5C stamping punch special counter

Super sensitive magnetic control induction switch, strong earthquake resistance, super precise count

Points:

1. Five large LCD screens with large and clear display

2. Common contact signal is adopted for input, and the magnetic induction sensor is simple and convenient to select, with accurate and reliable counting

3. No. 5 battery is used, no external power supply is required, and the battery is easy to be replaced (it has been installed when leaving the factory)

4. Launched the first seismic design to effectively prevent data loss

5. Accurate and sensitive counting, up to 1500 times/min

6. No mechanical wear, reliable work, long service life and other characteristics.

 Technical Parameters:
Power: 1.5V -- A A fifth battery
Clear mode: panel / external
Counting range: 0---99999
  Clear the minimum pulse width: 0.1 second
Counting the highest frequency: 1500 times / minute
Operating ambient temperature: -5--40 ° C
Count the minimum pulse width: 10mS
  Dimensions: 65*39*38 mm
Contact maximum resistance: ≤10KΩ
Opening size: 61*36 mm
Contact disconnection minimum resistance: ≥500KΩ
   Weight: about 130 grams

Counting input switch wiring:

Count signal input switch: the factory's magnetic control proximity switch can be selected: ck12-d20h, can also choose: micro switch, stroke switch, etc.

PAUSE count: press the count/PAUSE button to PAUSE the count; Press the count/PAUSE button again to restore the count.

Panel RESET: directly press the clear button (RESET).

External zero clearing: zero clearing terminal external contact is connected to direct zero clearing.

Notes:

1. The counting signal of the counter and the switch or circuit of the zero clearing signal input shall be as close as possible to the wiring terminal of the counter to make the signal line as short as possible.

2. Avoid connecting with other power lines, such as: strong power lines or power lines, etc., in the same pipe or stranded wiring. If necessary, please use the shielding wire, which is connected to the counting terminal +.

3. The counting signal and zero clearing signal of the counter can only be input into the contact signal, and other electrical signals cannot be input.

4. The contact input should be reliable, so as not to cause the wrong count and reset by mistake due to the contact rebound.

5. When the LCD display is fuzzy, please replace the battery.

We specialize in the production of various electronic components. Our mission is to provide customers with the best service, committed to establishing long-term cooperation with customers, looking forward to working with you.

1. Listen carefully to customer requests and provide different types of electronic products to meet customer requirements.
2. Respond to customer requests within 10 minutes of working hours to provide the best price to customers.
3. Patience and customer communication, and strive to meet customer requirements.
4. Quickly create a payment order so customers don't have to wait. Accept convenient payment methods: customers can make payment by alibaba trade assurance, Paypal, Credit Card, Bank Wire Transfer, Western Union, etc.
5. Produce high quality products, test, package and produce 100% qualified products.
6. Select the courier company requested by the customer to deliver quickly
7. The customer receives the product and the order is completed.