captcha

Welcome to wziep.com!

Products

  • Product
  • Supplier
  • News
  • Retail
Buyer Sign In Register Now
Categories
Event&Exhibition

D52-2047 Din Rail Digital 0-100.0A Ammeter AC 80-300V Voltmeter Led Display Amp Volt Energy Power Meter Active Watt Meter

category： Energy Meters

Purchase quantity
- +
Send Inquiry Add Collection

Yueqing Taixin Electric Co., Ltd.

Ms. Zheng
Enter the store contact us
Share To
Product details Company introduction
Parameter information
parameters

 

Specifications:
 

Voltage

D52-2047  Din Rail Digital Voltmeter Ammeter

 

  • D52-2047 DIN-rail multi-function Digital meter can measure AC voltage, AC current, power factor, active power, electric energy and electric energy of cumulative time.

 

1. Accuracy: 

   1%±2 words

2. Display Mode: 

   AC voltage and power factor use four red led of 0.31-inch

   AC current and electric energy of cumulative time use five red led of 0.31-inch

   Active power, electric energy use five green led of 0.31-inch

3. Range: 

   AC voltage : AC 80.0-300.0V / AC 200-450V  

   AC Current : AC 0.0-100.0A  Accuracy : 0.01A

   AC 80.0-300.0V Active power: 0.0-30000W,  AC 200-450V Active power: 0.0-45000W

   Electric energy: 0.000-99999kwh

   Electric energy of cumulative time: 0.00 - 999.59h

   Power factor: 1.000-0.000

4. Speed: 2 times per second

5. Size: 54*80*64mm

6. Installation: Din-Rail

7.  Phase: Single Phase (AC 80-300V) / Three Phase (AC 200-450V)

 

 
  • 1.Connect the measuring voltage to the 1 and 2 terminal.
  • 2.Connections of meter with internal current transformer as graph 1. Make the wire through the hole in the meter and the direction chose arbitrarily.
  • 3.Connections of meter with external current transformer as graph 2. Make the wire through the hole in the meter, and connect the two wires of the secondary transformer to the 3 and 4 terminal.
  • 4.When power on, the meter will display the measure result of the AC voltage (V), AC current (A) and active power (W)and the correlative red led will light up.
  • 5.When press the button of SAM CK (on the right of meter) down, the meter will change to display the measure result of power factor (cosΦ), electric energy of cumulative time (h) and electric energy (kwh) and the correlative red led will light up.
  • 6.When press the button of SAM CK down again, the meter will display the measure result of the AC voltage, AC current and active power.
  • 7. When power off, the meter can save the value of electric energy and electric energy of cumulative time, and go on cumulating data when the meter power-on next. When the meter is displaying electric energy, you can press down the button of SAM CK last for five seconds, then the electric energy and electric energy of cumulative time will to be zero and start to cumulate when release the button.
Product display

 

Company profile

 

Shopping notice