Technical Data Of Wall Panel Transmitter:

Operating Frequency: 433MHz. Battery Model: CR2032 Alkaline Battery (Package Not Included Battery). Material: HDPE(Type2) Plastic. Coding Specification: 1527. Distance: Indoor (20 Meters/65 Feets) , Outdoor (80 Meters/262 Feets). Color: Black. Size(L/W/H): 86mm x 86mm x 13mm. Weight: 60g/2.1ounces.

Technical Data Of Receiver:

Model Number: KR2201W-4. Input Voltage: AC 90-250V. Max Current: 10A. Wireless Type: Wifi 2.4GHz. Wireless standard: IEEE 802 .11 b/g/n. Remote ON/OFF: Turn electrical devices on/off from anywhere. App Support: Free iOS and Android mobile App "Smart Life". Sync Status: Real-time device status provided to App. Timing: Set scheduled/countdown/loop timers to turn on/off at specified time. Share Control: Control your smart home together with your family. Scene: Turn on/off a gang of devices with one tap. Voice Control: Works perfectly with Amazon Alexa,Google Home,IFTTT.

Notice:

The package Included different products because you choose a Different options.

Tip:

Professional electrician should operate this product. When powering on, do not touch the antenna. Install this product without opening the protective cover.

How to install this smart switch:

You don't need to open the outer casing of this smart switch. You can wire directly to the terminal block. Please note: Please turn off the power before wiring. Please connect the wires according to the following diagram.

WIRING DIAGRAM:

After the wiring is completed, turn on the power and operate according to the status of the smart switch indicator:

1) If the red light of the smart switch flashes continuously at this time, it indicates that the smart switch has entered the state of waiting for connection to WiFi; then open the APP and follow the instructions to connect to WiFi. 2) If the indicator light of the smart switch is not flashing red light, please press the button of the smart switch and keep it for more than 5 seconds until the red light flashes continuously, then open the APP and connect to the WiFi according to the manual. Scan the QR-code of the manual or Search ‘ Smart Life ’ to download and install the device's APP

How to match smart switch with 433Mhz RF remote control?

This Smart Switch only can link WIFI Then can match RF 433Mhz Remote Control. This smart switch has 3 working modes to match the 433Mhz RF remote: (smart switch, hereinafter referred to as: receiver)

About receiver's Working Mode:

Momentary mode: Press the Remote control button, the receiver's relay is ON; release button, the receiver's relay is OFF. Toggle mode: Press Remote control button for 1 time, the receiver's relay is ON; press button again, the receiver's relay is OFF. Latched mode: Press Remote control button A, the receiver's relay is ON, Press the transmitter's button B, the receiver's relay is OFF. Reset function: After push the receiver's learning button 8 times, the receiver Clear all the remote control data in its memory. When the red LED flashes for a few times, it indicates that the clear function is completed. (After cleared the code in the receiver, all the remote control cannot work with the receiver).

Matching method:

1. Setting momentary Mode: Press the receiver's Learning button 1 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully. 2. Setting Toggle Mode (Common working mode): Press the receiver's Learning button 2 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's red LED will flash then come off, Setting successfully. 3. Setting Latched Mode: (Note: When you choose "Latched Mode", you need to setting two different buttons on the Remote control, the first time learn is for “ON”, the second time learn for “OFF”. For example: button A = ON, button B = OFF) Press the receiver's Learning button 3 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's A button, the receiver's red LED will flash and then remains lit; Then press the remote's B button, the receiver's red LED will flash then come off, Setting successfully.

Note:

A Smart Switch can only store 12 buttons (on the remote). Saved button number of more than 12, it will cause all of the stored remote control cannot control the Smart Switch. You need reboot the power and reset the RF remote control settings (press the Smart Switch's matching button 8 times)