ETCR9000S High precision H / L voltage clamp ammeter 0.00mA-1000A

Model

ETCR9000S H/L Voltage Clamp Current Meter 

Measurement Range

0.00mA~1000A (50/60Hz automatic)

Resolution

0.01mA

Test Accuracy

±1%±5dgt

CT Size

φ48mm

Meter Dimension

76mm×255mm×31mm

Weight

1080g(include insulation rod and battery)

Insulation Rod Dimension

dia 32mm   300mm×3 piece

Line Voltage

Below 10kV (operate with insulation rods)

Power Supply

6V DC(LR03×4 alkaline dry batteries)

LCD Dimension

47mm×28.5mm

Sampling Rate

2 times/s

PEAK Hold

Automatically hold the highest test value. In the test mode, long press the PEAK key until the PEAK light on, which turns on the PEAK hold function

Data Storage

99 groups , stored process display MEM symbol, “FULL” symbol display indicate that storage full

Data Hold

In usual test mode, press HOLD key to keep data, “HOLD” symbol display

Data Access

“MR” symbol indication, can access all storage data

Overflow Display

Exceed measure range overflow function: “OL  A” symbol display

Automatic Shut Down

15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption

Battery Voltage

When battery voltage is lower than 4.8V, low battery voltage symbol “” will display and remind to replace battery.

Interference

No interference of 315MHz and 433MHz same frequency signals

Insulation Strength

Between the 5^th insulation rod and high voltage meter shell: AC 100kV/rms;

Between high voltage meter shell and iron core: AC1000V/rms

Accessories

Meter: 1PCS; Insulation rod (300mm): 3PCS; Tool bag: 1set