Unique U-shaped opening structure wireless H / L voltage U-type ammeter

Function

High voltage AC current measurement, low voltage AC current and online AC current monitoring

Power Supply

6V DC(LR03×4 alkaline dry batteries)

Test Mode

Non-contact U-type CT

Transmission Mode

433MHz wireless transmission, transmission distance is about 100 meters

Display Mode

4-digit LCD display, backlight function, suitable for measurement in dark place

LCD size

47mm×28.5mm

Meter Dimension

Detector:107mm×252mm×31mm; Receiver:78mm×165mm×41mm

CT Size

68mm

Insulation Rod Dimension

45mm, Contraction state: 850mm; Stretched state: 3600mm.

Insulation Rod Voltage Level

110KV

Sampling Rate

2 times / second

Measurement Range

0.00A~9999A(50/60Hz automatic)

Resolution

0.01A

Shift

0.00A~9999A automatic shift

Test Accuracy

±2%±5dgt (The wire is near the center of the bottom end of the U-type clamp,23℃±2℃)

Position Error

The measured conductor should be located as close as possible to the center of the bottom end of the U-type clamp.

Data Storage

99 groups , in storage process “MEM” symbol display, “FULL” symbol flash display indicate storage is full

Line Voltage

Bare wire test below 60KV (operated with insulation rod, The telescopic insulation rod is fully opened)

Data Hold

In general test mode, press HOLD key to hold data, “HOLD” symbol display. press HOLD Key once again to cancel this function

Data Access

“MR” symbol display, it can look over all the stored data

Overflow Display

Exceed measurement range overflow function: “OL  A” symbol display

No Signal Indication

When the receiver has not received transmit signal, dynamic display “no- -”symbol

Automatic Shutdown

15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption

Battery Voltage

When battery voltage is lower than 4.8V, low battery voltage symbol “- +” will display and remind to replace battery.

Weight

Detector:235g(with Battery ), Receiver:280g(with Battery ), Meter total Weight: : 2300g (including insulation rod and battery)

Working Temperature

-10℃ ~ 40℃; Below 80%Rh

Interference

Should try to avoid 315MHz, 433MHz same-frequency signal interference

Insulation Strength

AC 220kV/rms(The telescopic insulation rod is fully opened between the two ends)

Accessories

Clamp meter: 1PCS; Receiver: 1PCS; Telescopic insulating rod: 1PCS; Cloth bag: 1PCS