Welcome to wziep.com!
Welcome to wziep.com!
category: Panel Meters
reference price:¥$224.03 - $263.57
Unique U-shaped opening structure wireless H / L voltage U-type ammeter
Function |
High voltage AC current measurement, low voltage AC current and online AC current monitoring |
Power Supply |
6V DC(LR03×4 alkaline dry batteries) |
Test Mode |
Non-contact U-type CT |
Transmission Mode |
433MHz wireless transmission, transmission distance is about 100 meters |
Display Mode |
4-digit LCD display, backlight function, suitable for measurement in dark place |
LCD size |
47mm×28.5mm |
Meter Dimension |
Detector:107mm×252mm×31mm; Receiver:78mm×165mm×41mm |
CT Size |
68mm |
Insulation Rod Dimension |
45mm, Contraction state: 850mm; Stretched state: 3600mm. |
Insulation Rod Voltage Level |
110KV |
Sampling Rate |
2 times / second |
Measurement Range |
0.00A~9999A(50/60Hz automatic) |
Resolution |
0.01A |
Shift |
0.00A~9999A automatic shift |
Test Accuracy |
±2%±5dgt (The wire is near the center of the bottom end of the U-type clamp,23℃±2℃) |
Position Error |
The measured conductor should be located as close as possible to the center of the bottom end of the U-type clamp. |
Data Storage |
99 groups , in storage process “MEM” symbol display, “FULL” symbol flash display indicate storage is full |
Line Voltage |
Bare wire test below 60KV (operated with insulation rod, The telescopic insulation rod is fully opened) |
Data Hold |
In general test mode, press HOLD key to hold data, “HOLD” symbol display. press HOLD Key once again to cancel this function |
Data Access |
“MR” symbol display, it can look over all the stored data |
Overflow Display |
Exceed measurement range overflow function: “OL A” symbol display |
No Signal Indication |
When the receiver has not received transmit signal, dynamic display “no- -”symbol |
Automatic Shutdown |
15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption |
Battery Voltage |
When battery voltage is lower than 4.8V, low battery voltage symbol “- +” will display and remind to replace battery. |
Weight |
Detector:235g(with Battery ), Receiver:280g(with Battery ), Meter total Weight: : 2300g (including insulation rod and battery) |
Working Temperature |
-10℃ ~ 40℃; Below 80%Rh |
Interference |
Should try to avoid 315MHz, 433MHz same-frequency signal interference |
Insulation Strength |
AC 220kV/rms(The telescopic insulation rod is fully opened between the two ends) |
Accessories |
Clamp meter: 1PCS; Receiver: 1PCS; Telescopic insulating rod: 1PCS; Cloth bag: 1PCS |
1.Q: Are you trading company or manufacturer?
A: We are factory.
We have R&D department, OEM& ODM services available.
2.Q: How long is your delivery time?
A: We will arrange shipment in 3~5 days after check the payment.
3.Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample, but not for free; you need pay charge and the cost of freight.
4.Q: What is your term of payment?
A: Payment<=10000USD, 100% in advance. Payment>=10000USD, 30% T/T in advance, balance before shipment.
5.Q: What is the payment method?
A: We can accept Bank Transfer, PayPal, Western Union, Money Gram, Cash etc.
6.Q: Will you provide OEM service?
A: OEM & ODM services available
7.Q: How long is the product warranty?
A: 2 years.