ET310B: It's the perfect combination of the multimeter & Oscilloscope! Uniquely, the bluetooth wireless extended design enables you easily deal with the measuring datas and waveforms on the Android Phone and tablet!
Functions:
1· Combination of a 4000 counts auto-range True RMS DMM and a 80M sampling / 20MHz analog bandwidth handheld Digital Storage Oscilloscope at the size and the cost of a multimeter.
2· DMM functions include True RMS AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, dBm, diode and continuity tests.
3· Full auto set up for volt/div and time/div of DSO
4· DSO Trigger mode: Auto/normal/single
5· DSO Auto measure: Vpp, Vavg, Vrms, dBm
6· DSO Cursor readout: dV, dt, 1/dt (frequency)
7· Screen hold function
8· Save and recall up to 100 waveform and data
9· High contrast FSTN LCD with white LED backlight
10· Auto power off in 5~60min or continuous on
11· Inner Polymer Li-Ion Battery with AC adapter
Features:
1. LCD display Oscilloscope and TRMS Multimeter in 1 lab meter, portable design, more convenient and cost-effective.
2. Connectable to Android phone and tablet via bluetooth, remote testing available, suitable for test in difficult environment.
3. Oscilloscope functions: 80M sampling rate, 20MHz analog bandwidth, one-key oscilloscope, auto waveform capture, three trigger modes: single, normal, auto.
4. Multimeter functions: 4000-counts, automatic range, TRMS, AC/DC voltage, AC/DC current, resistance, frequency, capacitance, diode test, duty ratio, continuity test.
5. Display maximum value, minimum value, difference value and relative value on the same screen. Storage/readout 100 sets waveform and 100 sets data. Adjustable backlight, timed work available.
General characteristics:
display: 128 x 128 dot matrix is a graphic FSTN LCD
observation area: 72mm X 72mm
backlight: white, adjustable brightness, two levels
input resistance: 10MΩ
battery: 1000mAH lithium polymer battery
Charging time: 2-3h
working hours: about 10 hours
storage capacity: 100 sets DMM datas and 100 sets DSO waveforms
use environment: 0 ~ +40 degrees Celsius;
storage conditions: -10 ~ +60 degrees Celsius;
Dimensions: 86mm X 186mm X 32mm
weight: 325g (excluding other accessories)
power adapter: 110V~250V; 7.5V/500mA, switching power supply
80M sampling/20MHz analog bandwidth digital storage oscilloscope (DSO) combined with 4000 counts auto-range true RMS digital multimeter (DMM), one-button conversion oscillometric function.
Software calibration technology, memory calibration factor; panel with all - silicone buttons for easy operation DSO realizes one-button (AUTO) automatic display of measurement.