EBASE RT18Z-32 1A-30A PV solar dc Fuse

Application

RT18Z series Fuse is mainly used for solar 

Photovoltaic power generation in DC junction box, for possible solar photovoltaic battery components and inverter ducts by current feedback circuit overload and short circuit current of the breaker, to protect the solar photovoltaic module board, the fuse is optional for electrical components in any other DC circuit overload and short circuit protection.

Standard

 1.GB13539.1-2008(Low voltage fuse part.1: Basic Requirement)

 2.GB13539.2-2008(Low voltage fuse part.2:Full-time workers have been using the supplementary requirements

of fuse)

 3.IEC60269-1-2006(Low voltage fuse—part.1: General requirements)

 4.IEC60269-2-2010(Low voltage—part.2:Designated Personnel use the fuse(Mainly used in the industry of use)

Supplementary requirements

Applicable Working

1. The ambient maximum temperature does not exceed +900C, the minimum ambient temperature of -400C;

2. Altitude: the height ≤3000m

3. Relative humidity:notexceeding50% at the maximum the ambient temperature of +400C, at low temperature, can allow a higher temperature, For example, at+250C can reach 90%. Due to temperature change occasionally produce condensation special measures should be taken.

4. In the absence of explosion danger of medium, and no enough to corrosive action on metals, and damage the insulation medium gas and conductive dust.

5. Pollution levels: 3

1. About Us

Shanghai EBASEE Electric Co., Ltd. has been committed to low voltage electric products’ designing, R&D, manufacturing, and marketing for decades.

EBASEE factory locates in Shanghai,China, covering an area of 5000m². There are 300 well-trained workers, more than 30 rich experience production and R&D engineers. EBASEE product portfolio has 4 lines and 8000+ items in the application of power distribution, circuit protection, electricity control, and power measuring.

QUALITY is our CULTURE.  With qualified raw materials and components, all products are manufactured to defined specifications, applying ISO9001 quality control system and in compliance with relevant international approvals, such as RoHS, CE, CB, SEMKO, TUV, KEMA. CNAS approved laboratory enables EBASEE to develop and test new products to meet variable markets’ tailored demands. EBASEE branded and OEM/ODM products are widely served for residential, commercial and industrial applications in 60+ countries and districts.