0.28" dc voltmeter ampere meter digital and mini digital dc voltage meter ammeter for dual volt ampere meter digital display

Features:

Measuring Voltage: 0.00-33.00V;
Measuring Current: DC 0-999.9mA-3.000A (change the resolution automatically)
This Volt/Amp meter is 0.28'' 4 digit high accuracy dual display, the display is bright and sharp.
When measuring current, the measured line provides power supply. Don't need a isolated power supply.
High accuracy voltage measurement with measuring line voltage drop compensation.
A good tool to monitor charging LI-ion batteries and electronics bench, etc.

Technical Parameters:
Display color: Red+Blue
Display mode: Dual 0.28" LED digital 4 bit tube
Refresh rate: About 200 ms/time
Dimensions: 48 x 29 x 21 mm (L*W* H)
Cutting size: 45 x 26 mm (L*W)
Supply voltage: DC 3.5-28V
Lead wire length: 14 cm (5-wires)
Measurement range: DC 0-999.9mA-3.000A(current); 0.00-33.00V(voltage)
Operation temperature: -10 degrees~65 degrees
Measurement accuracy: ± (0.3% + 2 digits)
Net weight : 22g

Display Description:
Voltage measurement range: 0.00-33.00V; the minimum resolution is 10mV.
Current measurement range: 0-999.9mA-3.000A. when the measuring current is below 1A, it display ***.*mA, the resolution is 0.1mA; when the measuring current is higher than 1A, it display *.***A, the resolution is 1mA.

Wiring Instruction:
RED(VCC): Power input+, 3.5-28V (NOTE: If the measuring signal is lower than 28V and have abundant power supply, it can be used as power supply for the meter. black wire and yellow wire are contacted together to use)
Black(GND): Power input- , Measurement signal- (3.5-28V)
Yellow(VIN): Measurement signal+ (0-33.00V)
RED(I+): Current input+ (must be connected in series between Power Supply Negative and Load Negative)
Black(I-): Current input- (must connected in series between Power Supply Negative and Load Negative)

Package Includes:
1x 0-33.00V/0-3.000A Volt Amp Meter

More Option Models:
There are several different models of voltmeter for choosing, if you need, please contact our sales manager for quotation.

As Following :
(1) DC 0.000-9.999V (Red + Red)
(2) DC 0.000-9.999V (Red + Green)
(3) DC 0.000-9.999V (Red + Blue)
(4) DC 00.00-33.00V (Red + Red)
(5) DC 00.00-33.00V (Red + Green)
(6) DC 00.00-33.00V (Red + Blue)
(7) DC 00.00-99.99V (Red + Red)
(8) DC 00.00-99.99V (Red + Green)
(9) DC 00.00-99.99V (Red + Blue)
(10) DC 00.00-200.0V (Red + Red)
(11) DC 00.00-200.0V (Red + Green)
(12) DC 00.00-200.0V (Red + Blue)
(10) DC 00.00-500.0V (Red + Red)
(11) DC 00.00-500.0V (Red + Green)
(12) DC 00.00-500.0V (Red + Blue)

 
SK85 Series Mini Digital Panel Meter
Basic Technical Specifications:

Working Environment Note:

1. Should be used in the temperature range 0~40C, humidity: ≤80%, to prevent undesirable phenomena caused by temperature changes.
2. Take care of vibration and shock.
3. Do not use it in places with dust, gas and chemicals harmful for electrical products.If the abnormal voltage is caused by the magnetic field, high frequency devices, high voltage spark, lightning and etc, please use the external power line filter or non-linear resistors to interfere and absorb the circuit.The signal input line should be as short as possible, and protective shielding wire should be used in places where there may be interfering signals. It is recommended to use twister pair in general conditions.

Further information:

1. Plastics materials: all raw materials are brand-new and second-hand materials are forbidden. Furthermore some of them are supplied by super branding companies like DSM, Mitsubishi.

2. There is just one level of quality as A in MEIHENG and we are aim to provide the excellent articles to our clients and help them gain more market shares.

3. ODM: we are providing ODM services to the super companies (more than 15) who are top-10 electrical industrial companies in their country. Just show us your ideas and we will present a solution.

FAQ

A. How's the delivery time?
Depend on your quantity, usually within 20days after receiving deposit

B. Would you accept OEM/ODM service?

Glad to say that there is planning department, technical department and mould tooling center in

our factory. For the OEM & ODM, it is ok for us if your brand, market shares are great.