Welcome to wziep.com!
Welcome to wziep.com!
category: Clamp Meters
reference price:¥$5,000.00 - $6,000.00
6KV~35KV Wireless medium voltage current clamp recorder energy meter on power line
GF2013 medium voltage clamp current meter with wireless is installed on high pressure 6KV~35KV power line, this phase load current measuring calculation, and the measured value through the 433M wireless communication transmission to other copy read equipment (intelligent terminal) analyzed and using.
The equipment adopts Rogowski coil measurement technology, low power design and has charged installation etc., easy to use, simple.
Basic parameters | |
---|---|
Type | Recording ammeter kit 3 wireless current sensors (GF2013A, GF2013B, GF2013C) 433M wireless data reader(GF2013R) PC-Linksoftware software(GF2013S) Carrying case |
Data recording interval | 5min, 10min,15min, 30min; |
Communication distance(wireless) | 100m |
Communication | 433M, 868M or 915M (option) |
Installation | Installation with electricity; remove with electricity |
Battery | 3.6 volt lithium battery,9000mAh |
Software requirements | PC-LinkSoftware & Microsoft Excel |
Processor | 100 MHz or Higher ( 200 MHz or higher recommended) |
RAM | 32 MB, 64M Recommended |
Drive Space | 15 MB to load software, 10 MB of operating space |
Electrical parameters | |
Amps accuracy | ±1% of reading plus 2 counts |
Frequency | 50/60 Hz |
Range of operation | |
Voltage | 69kV, 35kV, 20KV, 10kV, 6kV |
Current | 1-100A, 1-300A |
Sensor opening | up to 3.3 cm |
Resolution | |
1-99.9A | 0.1A |
100-300A | 1A |
Mechanical parameters | |
Dimensions (W×D×H) (mm) | 500x600x175 |
Weight (kg) | 0.42 |
Environmental conditions | |
Operating temp | -40°C to 60°C |
Use of position | Outdoor or indoor |
Product features and specifications