Welcome to wziep.com!
Categories
Welcome to wziep.com!
category： Inverters & Converters
reference price：￥$60.00 - $120.00
1.Pictures of
DELIXI E180 0.4-700KW 380v variable ac drive low frequency 37kw inverter
2.Introduction of
DELIXI E180 0.4-700KW 380v variable ac drive low frequency 37kw inverter
The CDI-E180-series inverter (0.4-700 kw) is a stable and versatile high-performance vector control inverter with optimum control modes such as SVC, V/F control and VC, and is widely used in situations with demanding requirements for speed control precision, torque respond speed and low-frequency output torque.
3.Technical Characteristics of
DELIXI E180 0.4-700KW 380v variable ac drive low frequency 37kw inverter
-Excellent Performance
Due to the new vector control algorithm, the inverter features large start torque, quick torque response and high control precision to further improve the efficiency of the motor.
-Strong Function and Low Cost
The large number of internal function modules such as timer, virtual time-delay relay and math operation modules are as a whole equivalent to an additional small PLC, so that the cost is significantly reduced.
-Easy Operation
A special-purpose function is embedded, and the conversion between the special-purpose function and the common function is available through one function code, for the convenience of type selection and flexibility in use.
-Flexible Type Selection
The 15kW or below types have standard internal brake units, the 18.5-30kW types can have optional internal brake units, and the 37kW above types shall be connected with external brake units. The 11kW, 15 kW, 200 kW or above types have standard DC inductors, and 18.5-55kW types can have optional DC inductors.
4.Applications of
DELIXI E180 0.4-700KW 380v variable ac drive low frequency 37kw inverter
5.Accessories of
DELIXI E180 0.4-700KW 380v variable ac drive low frequency 37kw inverter
E180-I/O expansion card; E180-PG coder expansion card; E180-485 communication expansion card; E180-DP communication expansion card.
E180-ZS injection molding machine expansion card; E180-WSP constant pressure water supply expansion card.
E180 Series Inverter Technical Standard
|
|
item |
specifications |
|
Control |
Control Mode |
V/F control |
|
Frequency Precision |
Digital: 0.02% |
|
|
V/F Curve |
Linear, square root, any V/F |
|
|
Overload Capacity |
G-type: 150% rated current for 60s; 180% rated current for 3s |
|
|
Start Torque |
G-type: 0.5Hz/150% (SVC); 0Hz/180% (VC) |
|
|
Speed Adjustment Range |
1:100 (SVC) 1:1000 (VC) |
|
|
Steady Speed Precision |
0.5% (SVC) 0.02% (VC) |
|
|
Torque Precision |
5% (VC) |
|
|
Torque Compensation |
Manual torque compensation (0.10%-30.0%); Automatic torque compensation |
|
|
Operating Mode |
Key-board, terminal, RS485 communication |
|
|
Basic |
Frequency Source |
14 main sources, 14 auxiliary sources. |
|
Torque Source |
14 torque sources, including digital setting, external analog, pulse setting, |
|
|
Acceleration and Deceleration Time |
4 groups of lines (can be switched through the option terminals); S Curve 1, S Curve 2 |
|
|
Emergency Stop |
Interrupt the output instantaneously |
|
|
Multi-speed |
16-shift speeds at most; can be switched by different combination of order terminals |
|
|
Simple PLC |
Continuous operation of 16-shift speeds; the acceleration/deceleration time, operating |
|
|
Inching Control |
Inching frequency and inching acceleration/deceleration time can be set separately; |
|
|
Rotating-speed Track |
Track the start speed and operating speed of the inverter’s load |
|
|
Length and Distance Control |
Length and distance control through pulse inputs |
|
|
Counting |
Counting through pulse inputs |
|
|
Swing Frequency |
For winding machines in the textile industry |
|
|
Internal PID |
Closed-loop process control system is available |
|
|
AVR |
Ensure constant output in case of fluctuating grid voltage |
|
|
DC Brake |
Quick and stable parking is available |
|
|
Slip Compensation |
Compensate the slip deviation due to increased load |
|
|
Hopping Frequency |
Prevent resonance with the load |
|
|
Droop Function |
Balance the load rate of different motors which drive the same load |
|
|
Timing |
Automatic stop at a given time |
6.Other Series to Choose
