Pulse high voltage package inverter 901 DC high voltage module Arc generator 3-6V 800-1000KV

Pulse high voltage package inverter 901 DC high voltage module Arc generator 3-6V 800-1000KV

This module is the finished module of high voltage inverter, transformer/booster for science small manufacture

After input dc3.7v-6v voltage at the input end, a dc high voltage of tens of thousands of volts can be obtained at the output end

Can be used as high school science experiments, electronic instruments, negative ion generator, science small production of high voltage source

The module is made by using the principle of tesla coil, with high voltage pulse current output, small size and high efficiency

The external circuit is simple (only need to connect the switch, the battery can be) the discharge intensity is strong.

Note that this is not a high temperature arc, can not point to the cigarette oh paper

Method of use

The module is divided into the input end and the output end. The red and green lines are the input end and the red positive and green negative. The output end is two high-voltage wires of the same color.

Please operate the module in strict accordance with the use method and precautions, otherwise it is easy to damage the module!

About the input power supply: you can use a single 3.7v lithium battery or two batteries in series, such as 18650 battery, idle mobile phone battery (to remove the protection board, the recommended capacity is more than 2000mAh) or nickel-cadmium/nimh battery pack, 4V or 6V lead-acid battery, etc. (6V battery can achieve the effect)

 Pay attention to

1. The high-voltage module should avoid the use of high-voltage no-load power supply. Before power supply, the appropriate distance of the high-voltage line end must be adjusted.

2. The arc distance shall be tested from short to long. When energized, it is strictly prohibited to exceed the longest arc distance.

3. Due to the high power of the module, it is not suitable for internal heat dissipation. Therefore, it cannot work for a long time.

4. The way to judge whether the battery capacity can drive the output power is to measure the battery voltage during arc drawing. If it is around 6V, the power can be output.

5. The two-section series connection of lithium battery with small capacity is 7.2v, and the measured voltage has dropped to about 4V in the arcing state, and the lower the capacity is, the lower the voltage will be. Therefore, it is recommended to use more than 2000MA lithium battery, and it is better to use more than 4000MA battery when conditions permit

We specialize in the production of various electronic components. Our mission is to provide customers with the best service, committed to establishing long-term cooperation with customers, looking forward to working with you.

1. Listen carefully to customer requests and provide different types of electronic products to meet customer requirements.
2. Respond to customer requests within 10 minutes of working hours to provide the best price to customers.
3. Patience and customer communication, and strive to meet customer requirements.
4. Quickly create a payment order so customers don't have to wait. Accept convenient payment methods: customers can make payment by alibaba trade assurance, Paypal, Credit Card, Bank Wire Transfer, Western Union, etc.
5. Produce high quality products, test, package and produce 100% qualified products.
6. Select the courier company requested by the customer to deliver quickly
7. The customer receives the product and the order is completed.